Print
Category: Uncategorised
Hits: 1504

T1, T2 and T3 Transfer Pumps Transfer Pumps

Ideal for moving A and B materials to Reactor spray machines

 

Graco's family of transfer pumps maintain performance in any environment. Transfer pumps are required to feed chemical to your Reactor spray machine or any other equipment requiring fluid transfer. Consider your material viscosities, desired output rate, interior ceiling height of your rig, and available air pressure when choosing your ideal transfer pump.


  Part Number Ratio Maximum Output
Continuos
Maximum Input
Air Pressure
Maximum Output
Fluid Pressure
Maximum Ambient
Temperature
Maximum Fluid
Temperature
Weight Height Manual Number Wetted Materials
T1 256200 2:1 9.5 lpm (2.5 gpm) 12 bar (180 psi/1.2 MPa) 25 bar (360 psi/2.5 MPa) 49°C
(120°F)
88°C
(190°F)
8.4 kg
(18 lb)
131 cm
(51.5 in)
312766 Stainless Steel
T2 295616 2.25:1 19 lpm (5.0 gpm) 12 bar (180 psi/1.2 MPa) 28 bar (405 psi/2.8 MPa) 49°C
(120°F)
88°C
(190°F)
9.5 kg
(21 lb)
137 cm
(54 in)
311882 Stainless Steel
T3 SST 26A304 3:1 17 lpm (4.5 gpm) 6.8 bar (100 psi/0.68 MPa) 21.7 bar (315 psi/2.17 MPa) 49°C
(120°F)
88°C
(190°F)
10 kg
(22 lb)
128 cm
(50.3 in)
3A5180 Stainless Steel
T3 CS 24Z834 3:1 17 lpm (4.5 gpm) 6.8 bar (100 psi/0.68 MPa) 21.7 bar (315 psi/2.17 MPa) 49°C
(120°F)
88°C
(190°F)
10 kg
(22 lb)
128 cm
(50.3 in)
3A5180 Carbon Steel
 
 
T2 pump in barrel

 

  • Provide consistent feed pressures and flow rates for dependable results
  • Lower pressure drops with higher viscosity materials at any ambient temperature
  • Designed and manufactured by the worldwide leader in pump technology
  • Longer lasting pump - designed for durability with less maintenance
  • Quick-release bung adapter for easy drum removal without interference from hose connections
  • Stainless steel wetted parts for corrosion-resistance
  • PTFE seals for improved performance and less maintenance